Which Motor Oil Is Thicker

You might be familiar with terms such as “30-weight” or “10W-30” oil. Those numbers refer to the grade. The higher the number, the thicker the oil. The lower the number, the thinner.

What oil is thicker 10w30 or 5w30?

10w30 is thicker than 5w30 because it has a higher viscosity in low temperatures. The engine oil will flow slower than 5w30 during the cold season. Thicker or higher viscosity metal oil has a better seal compared to low viscosity oil. Thicker oil offers better lubrication of motor and engine parts.

Which is thicker 10W40 or 10w30?

10W40 oil has a higher viscosity, retaining more thickness than 10W30 as the temperature rises. In that case, 10W-40 motor oil would technically provide better protection against engine wear contact in higher temperatures.

Which motor oil is thickest?

The thickest viscosity grade for automotive applications is a SAE 60 which has a viscosity between 21.9 and 26 cst at 100c.

Which oil is thicker 5w30 or 10W40?

A 10w-40 motor oil is a thicker oil at startup than a 5w-30 motor oil. Therefore, 10w-40 oil clings to the engine’s moving parts more than the lower viscosity 5w-30 oil.

What happens if you use 10w40 instead of 5w30?

If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

Can you put 10w40 in a 5w30 engine?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

Can I replace 10w30 with 10W40?

As we have just seen, both 10W30 and 10W40 have winter SAE oil grades of 10W. SAE grades range from 0W to 25W, and so you might think of 10W as being the sort of average “winter” viscosity across the automotive industry. Since both oils are the same here, it won’t make any difference at this point…Jan 20, 2021.

Is it OK to put 10W40 in a 10w30?

Mixing 10W30 with 10W40 Some say that mixing them is fine as long as you don’t live in freezing weather. Even if you put together synthetic and conventional blends of these motor oils, they show no harm to your vehicle.

Which oil is thicker 10W40 or 10W50?

The 10W40 and 10W50 have similar viscosity at 0º (they’re considered to be the same class, not necessarily identical , but at operating temperature (100ºC) the 10W50 will have higher viscosity than the 10W40.

What oil is thicker 10w30 or 20w50?

It really comes down to personal preference. As your engine does put out significant horsepower, we would lean toward using 20W-50. If your engine sees very light duty or is built exceptionally tight, 10W-30 would be fine. But again, if you twisted our arm, we would give 20W-50 the nod for the thicker viscosity.

Is 20W-50 oil thick?

SAE 20W-50 is a thicker oil with high viscosity at hot temperatures and is highly resistant to oil thinning. Despite being one of the less popular oil viscosity grades, it’s still recommended for a lot of automobile vehicles.

What happens if I use 20w50 instead of 5w30?

20w50 is actually thicker than 5w30. This will result in less fuel efficiency, less horsepower, and more engine damage because it will have to work harder to rotate. Trust the engineers that made your vehicle.

Is 10w40 good for high mileage?

Mobil 1 High Mileage 10W-40 motor oil is recommended by ExxonMobil for use in high mileage vehicles (even those that have used lower quality conventional oils†), including: Cars.

Should I use thicker oil in an older engine?

Older engines use more oil, but it gives them a better fuel economy. Older engines with more than 75,000 miles on them require a thicker oil that will lubricate their critical engine parts and prevent oil leaks, sludge, and deposits from forming.

What is 10w40 oil used for?

This oil weight is commonly used in diesel engines or in a smaller motorcycle engine too. The 10W-40 oil viscosity also often serves as an alternative for older engines with burning or oil leaking issues. Why is that? The 10W-40 engine oil has a thicker viscosity than, say, 10W-30 oil when the car engine is hot.

When should I use thicker oil?

If, for instance, clearances between engine components have increased, gotten sloppy, a thicker oil can help to fill the void. Within reason, thicker oil maintains a better lubricant film between moving parts. Some have even used thicker oil in a leaky engine to prevent oil from seeping out.

Can I put 5w40 instead of 5W30?

There’s not going to be much functional difference between a 5w-30 and 5w-40 as there’s a lot of functional overlap in the recommendations. The lower weight might yield better efficiency under light load operating conditions, but higher weight might yield better protection under higher load operating conditions.