Quick Answer: What Size Tankless Water Heater To Replace A 50 Gallon

To replace a 50-gallon water heater, you would, roughly speaking, need: 10 GPM gas tankless heater or at least a 27 kW electric tankless water heater if you live in the northern part of the USA. 7 GPM gas tankless heater or at least an 18 kW electric tankless water heater if you live in the southern part of the USA.

How do I know what size tankless water heater I need?

How to Select the Right Size Tankless Water Heater Determine the maximum number of devices you want to run and their total flow rate. Then, add up their flow rates (gallons per minute). Determine required temperature rise. Sizing Example: An average shower will be between 104–106° and uses 2.6 gallons of water.

Can tankless water heater be too big?

However, tankless water heaters are limited by how much water they can heat at any given time. Choose too small of a system and it won’t have the capacity to provide enough hot water to meet your household needs. Go too big and you will overpay. This is why proper sizing is key – before making a purchase.

Do I need 1 or 2 tankless water heaters?

For larger households that typically use more than 85 gallons per day, two tankless systems, or the largest available model, are likely needed. For smaller households that use under 40 gallons per day, one unit should suffice. They are miniature tankless water heaters designed for use at one outlet, such as a sink.

Is a 50-gallon hot water heater enough for a family of 4?

For a four-person family, a 50-gallon water heater is sufficient. 50-gallons is good if you’re using electricity, and 40 gallons will work for natural gas or propane. Families with more than five persons may benefit from an 80-gallon electric water heater or 50-gallon gas water heater.

What size tankless water heater is needed for a family of 4?

What Size Tankless Water Heater Do I Need For A Family Of 2, 3, 4, 5, Or 6? Number Of Family Members: Gas Tankless Heater Size (GPM) Electric Tankless Heater Size (kW) What size tankless water heater do I need for a family of 3? 7-9 GPM 15-23 kW What size tankless water heater do I need for a family of 4? 8-10 GPM 20-28 kW.

Is it worth switching to a tankless water heater?

The big advantage of tankless water heaters is that they use less energy since they only heat up water when you need it. You can save hundreds on your energy bill each year. Because they don’t waste power, you can also enjoy the fact that your home will be more sustainable and eco-friendly.

Why is tankless water heater installation so expensive?

Installation is expensive because the unit needs a bigger gas supply than a conventional water heater does, and it needs to run its own exhaust flue to the exterior. Installation costs can vary widely, depending on the location of the flue and the gas supply. The unit itself costs between $800 and $1,000.

How many gallons per minute does a tankless water heater use?

The best sizing factor for a tankless water heater is its flow per minute rate. A 3.2 gpm, tankless heater can heat 3.2 gallons of water per minute, which is roughly enough to provide hot water to a shower and a sink. To find the correct capacity, add up all of the fixtures that you expect to use at the same time.

How do you size a Rinnai tankless water heater?

To find the ideal tankless water heater size for your home, you will need an idea of how many gallons per minute (GPM) you will need. Here are some examples of items used in the home and how many GPMs are used.

Can you daisy chain tankless water heaters?

Typical of tankless heaters, in northern US when water supply gets colder, you get less hot water out. If you daisy chain 2 units, will need two 60 Amp circuits. If the flow rate is exceeded, water gets cold fast. Typical of tankless heaters, in northern US when water supply gets colder, you get less hot water out.

Can I install two tankless water heaters?

It is possible to connect two tankless heaters to run parallel to each other, providing a larger amount of hot water on-demand. You could also get a larger tankless unit that can provide a higher flow rate.

Can you install multiple tankless water heaters?

Greater efficiency can be achieved by installing multiple, smaller tankless water heaters throughout the home. Hot water is then drawn from nearby tankless appliances instead of being lead through the home’s entire plumbing system from basement to point-of-use.

How many showers can you get out of a 50 gallon water heater?

If a water heater has a 50-gallon tank of fully-heated water, it should easily be able to supply enough hot water for a fifteen or twenty minute shower. Showers longer than that are unnecessary.

Do I really need a 50 gallon water heater?

Typically, the rule-of-thumb is that you want a 40 gallon tank for 1 to 4 people, a 50 gallon tank for 4 to 6 people, and a 50 gallon high recovery or 75 gallon tank for 6 to 8 people.

How many showers can you put in a 50 gallon water heater?

On a national average of 8 minutes to take a shower you can can get 2 showers out of a 50 gallon water heater. Based on 17 minutes of hot water run time at 2.1 gallons per minute shower head flow calculation also from a 50 gallon water heater.

What size wire do you need for a tankless hot water heater?

You must utilize either a 120- or 240-volt circuit, wholly devoted to the heater. Both voltages require 8-gauge wire, and the section exposed to the area under the sink must be armored cable. If the manufacturer’s instructions call for a larger cable, the National Electrical Code says you must comply.

Does a tankless water heater save money?

According to Energy.gov, “For homes that use 41 gallons or less of hot water daily, demand (or tankless) water heaters can be 24% to 34% more energy efficient than conventional storage tank water heaters.” Tankless water heaters (if gas-fired) will save homeowners over $100 annually the longer they remain in service.