Quick Answer: What Does The Tire Size Mean

The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tire’s width. The bigger the aspect ratio, the bigger the tire’s sidewall will be.

What does the 265 70R17 mean?

How to read your tire size long description. An arrow points to the numbers 265/70R17 115T on the inner part of the tire sidewall. 265 is the width, 70 is the aspect ratio, R stands for radial, 17 is the wheel diameter and 115T is the load index and speed symbol.

Can you use 235 tires instead of 225?

Can 225 fit 235 tires? Yes, they can. 225 tires are 10 mm narrower and 15 mm lower in height than the 235 tires. Besides, 235 tires are wider than 225, and so we recommend checking the owner’s manual.

What does tire size mean in inches?

The diameter of the rim in inches. A standard sized tire will be displayed in inches. A tire that reads 33 x 12.5 R15, is 33-inches in diameter (or tall), 12.5-inches wide, and will fit a 15-inch wheel. The door jam of your vehicle will also indicate what size tires the manufacturer recommends.

What size tire is 255 70R17?

Tire Size Calculator – Tire & Wheel Plus Sizing BETA Unit: Imperial Imperial Metric Section Width 10.04 in Rim Diameter 17.00 in Rim Width Range 6.50 in – 8.50 in Overall Diameter 31.06 in.

What is P265?

Let’s take for example P265/60R18. This code gives you the following information about your vehicle’s tire: P = Passenger Tire (Light Truck Tires will begin with the prefix LT). 265 = Section Width in millimeters (measured at the widest part of the tire from sidewall to sidewall).

Should I change all 4 tires?

Some manufacturers of all-wheel-drive vehicles recommend that all four tires be replaced, not just one or two, because a new tire will have a larger overall diameter than the other tires. The best approach, though, is to replace all four if the tread on the old tires is significantly worn.

How much difference in tire size is acceptable?

When changing tire sizes, we recommend staying within 3% of the diameter/height of the original tire. Any more than this and you face the risk of brake failure.

Is wider tires better?

Overall, wider tires are better for dry surfaces and for high-performance vehicles. Greater surface area allows for better day-to-day traction and durability.

What does 50r mean on tires?

50 is the two-figure aspect ratio. This percentage compares the tire’s section height with the tire’s section width. For example, this aspect ratio of 50 means that the tire’s section height is 50% of the tire’s section width. R indicates the construction used within the tires casing. R stands for radial construction.

Can I use 60 instead of 55 tires?

Most likely yes. The 55 or 60 in this case is the aspect ratio. It’s how tall the tire is as a percentage of its width. A 60 means the tire’s sidewall height is 60% of the width of the tire.

What do the 3 numbers mean on tire size?

Tire Width Is the width of the tire measured in millimeters from sidewall to sidewall. The first three-digit number in the tire size refers to the tire width. For instance, in a size P215/65 R15 tire, the width is 215 millimeters.

Can I use 245 tires instead of 235?

So you have already identified the difference between 235 and 245 size tires. It is obvious that 245 is bigger than 235, still, both tires’ sizes are pretty common and could be interchangeable at times.

What does 35X12 50R17 mean?

35X12.50R17. Diameter : 35.0″ Width : 12.5″ Wheel : 17″ x 8.5-11″.

What does tire size mean P275 55R20?

The same 2014 Ford F150 in their Platinum Series comes with a tire size of P275/55R20. The tire is a (P) passenger tire, with a tread width of 275 millimeters, the sidewall is 55% as tall as the tread (section width) is wide, and the wheel diameter is 20 inches.

What size is 265 75R17 in inches?

Plus Sizes 265/75-17 265/70-17 Diameter inches (mm) 32.65 (829.3) 31.61 (802.8) Width inches (mm) 10.43 (265) 10.43 (265) Circum. inches (mm) 102.57 (2605.32) 99.29 (2522.07) Sidewall Height inches (mm) 7.82 (198.75) 7.3 (185.5).

What does lt285 70R17 mean?

This number indicates that your tire has a width of 285 millimeters. 70. This number means that your tire has an aspect ratio of 70%. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 70% of the width.

How tall is a 295 70R17 tire?

Open Country M/T 295/70R17 Tire Specs Size Diameter Width LT295/70R17 128P E BSW 33.5″ 11.9″.

What does 65r17 mean?

This number indicates that your tire has a width of 265 millimeters. 65. This number means that your tire has an aspect ratio of 65%. In other words, your tire’s sidewall height (from the edge of the rim to the tire’s tread) is 65% of the width.

What does the 113s mean on tires?

113 is the load rating, it means the tires can handle up to 2535 lbs. S is the speed index, which means the tires can go up to a speed of 112 mph. The office is open between 9am and 6pm EST. Thank you for your interest. Priority Tire ✅.

What does LT265 75R16 mean?

This formula is a quick way to get the tire diameter of those metric tires that are common on just about everything stock. For example a LT265/75R16 would be around 31.6 inches tall and 10 inches wide. “LT” means Light Truck and “P” means Passenger tire. The bigger number (on the left) is the Section Width.