Quick Answer: How To Reset My Ring Doorbell

To perform a hard reset, hold down the orange button for 20 seconds. After releasing it, the light on the front will flash a few times indicating that your Ring Doorbell is restarting. It may take a minute to fully complete this process.

How do I reset my ring?

Remove the doorbell’s faceplate then press and hold the reset button on the right side of the camera for 15 seconds. After releasing it, the ring light located on the front will flash a few times indicating the doorbell is restarting. The doorbell is now reset to factory defaults.

How do I reset my Ring Doorbell pro?

If the light on your Video Doorbell Pro does not light up and flash and your Spotlight Cam has power, you can try performing a hard reset. Hold down the right button for a full 30 seconds.

Where is the reset button on my Ring Doorbell?

1. To reset the Ring 1, find and press the orange button on the back of the doorbell, holding it down for at least 20 seconds before releasing. To reset the Ring 2, hold down the black button on the front of the doorbell for 20 seconds.

How do I reset my Ring Doorbell without the app?

Ring Doorbell: How to Hard Reset Locate the orange button located physically on the back of the doorbell. Press and hold the orange button for more than 15 seconds. Release the button after 15 seconds. Let the device complete the reset for about 5 minutes, and the hard reset should be completed.

How do I reset my Ring Doorbell WIFI?

Follow these steps to reconnect your doorbell or security camera wifi in the Ring App: Tap on the three lines on the top left. Tap Devices. Select doorbell or security camera you need to reconnect to wifi. The next screen is the Device Dashboard. Tap on Device Health. Tap on Reconnect to Wifi or Change Wifi Network.

How do I reset my Ring Doorbell 3?

Ring Video Doorbell 3, Ring Video Doorbell 3 Plus and Ring Video Doorbell 4 Undo the security screw to remove the faceplate. Find the setup button on the top right, just below the camera. Press and hold the setup button for 10 seconds. Once the reset is complete, the doorbell will enter Setup Mode.

How do I reset my outdoor Ring camera?

Ring Spotlight Cam Battery Find the setup button on the top of the camera. Press and hold the setup button for 10 seconds. The light on the front of the camera will flash for several minutes; when the light turns off the reset is complete.

How do I reset my Ring Doorbell from previous owner?

How Do You Reset the Ring Doorbell for a New Owner? Remove the back plate from the Ring. Hold the orange button on the back of the device for 15-20 seconds. Once you see the Ring flash a light on the front, you’ll know it has completed the hard reset successfully.

Why is my Ring Doorbell not connecting?

If you’re using an Android phone and can’t connect to the Ring network, you may need to adjust the Smart Network Switch. If you’re setting up a new Ring device that’s battery-powered, your battery will be partially charged when you receive it because there are legal restrictions on shipping lithium batteries.

Why is my Ring Doorbell not connecting to WIFI?

Check to see whether another Wi-Fi device is having a problem connecting to the network. Unplug your router for 30 seconds and then plug it back in. See if your Ring Doorbell automatically reconnects. Wait 10 seconds, then press it again and see if your Ring Doorbell automatically reconnects.

How do you reset the Ring Doorbell on the app?

What to Know The quickest way to fix an issue is reset to factory settings. To reset, press orange Reset for 15+ seconds > release button, ring light flashes. When light goes off, doorbell is reset. To disconnect your account, open Ring app on smartphone > Settings > Remove Device > Delete.

Where is the orange button on Ring Doorbell?

Press and release the orange button on the back of your Ring Video Doorbell. When there is a spinning white light on the front of your Ring Video Doorbell, tap the “Continue” button in your Ring app. The Ring wifi network is a temporary access point that you join briefly during the setup of a Ring device.

Why is my Ring Doorbell flashing blue?

A flashing blue light means that the Ring Doorbell is re-starting or booting. If this continues without stopping for a long period of time, then your doorbell might be stuck in a boot loop. If this is the case, contacting support might be a wise move. If the light has 4 blue LEDs flashing four times.

How do I connect my Ring Doorbell 2 to a new Wi-Fi?

Here are the steps: Open the Ring app. Click on the three lines icon in the top-left corner. Tap “Devices.” Select your Ring Doorbell. Tap “Device Health.” Choose “Change Wi-Fi Network.” Stand next to the doorbell. Follow the on-screen instructions to put your doorbell in set-up mode.

How do I connect my Ring Doorbell to Wi-Fi?

How to Connect a Ring Doorbell to Wi-Fi Download the Ring app on iOS or Android. Scan the MAC ID barcode or QR code on the back of the device or product packaging. Put in your home address and name the device. Use the setup button on the device to put it in setup mode. Tap “Join” and select the Ring doorbell.

How do I reset my Ring Doorbell 2?

1 Factory Reset a Ring Video Doorbell 2 Remove the doorbell’s faceplate then press and hold the reset button on the front of the camera for 15 seconds. After releasing it, the ring light located on the front will flash a few times indicating the doorbell is restarting. The doorbell is now reset to factory defaults.