Tips for Adding Start-Up Pool Chemicals Add one chemical at a time, using a pool brush to distribute. Run filter pump while adding chemicals to circulate. Re-test the pool water after 8 hours of filter run time. Add chlorine shock when the sun is not directly overhead.
How do you start a pool with chemicals?
For pool startup, it’s best to double shock your pool, meaning that you add two pounds of chlorine shock for every 10,000 gallons of water. After shocking a pool, aim to have chlorine at 10 ppm. After this routine, your pool should be good to go.
Do I need to shock my pool when I first fill it?
At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. Now it’s time to keep the water hardness in check, otherwise known as alkalinity.
How do I add chlorine to my pool for the first time?
If you’re adding chlorine for the first time, add the amount of product required to achieve a free available chlorine level of 2 to 3 ppm. The instructions will let you know how much to use to raise levels by 1 ppm per 10,000 gallons (38,000 L) of water.
How do I shock my pool for the first time?
How do I shock my pool? Check that the pH levels in your pool are balanced. Prepare shock ahead of time in a 5-gallon bucket of pool water and stir. Ensure the pool pump is running. Pour the mixture from the bucket into the water around the edges of the pool. Let the pump run for about 6 hours or more and test the water.
What order do you balance pool chemicals?
7 Steps to Balance Pool Water Test and Adjust Total Alkalinity. Test and Adjust pH. Measure and Adjust Calcium Hardness. Add Sanitizer to Your Water. Check and Adjust Cyanuric Acid. Measure Your Water’s Total Dissolved Solids. Shock Your Swimming Pool.
What to do after filling a pool?
What Do You Do After an Above Ground Pool Is Filled With Water? Step 1: Learn about how to prevent drowning and pool chemical injuries. Step 2: Turn on the filter. Step 3: Vacuum and skim off debris. Step 4: Test the water, and then test it again. Step 5: Enjoy your pool, but safely!.
Can you swim in pool before adding chemicals?
6. Add chlorine until the chlorine level is between 1.0 and 2.0. Although some sources allow chlorine levels as high as 3.5, this may be irritating to skin and eyes. Allow 24 hours for the pool chemicals to stabilize.
Which pool chemicals to add first?
When Balancing Water, Start With Total Alkalinity Total alkalinity should be balanced first, because it will help bring the other aspects of water chemistry closer to their normal range. This makes it significantly easier to achieve a safe and clean pool. To lower the total alkalinity, you can use Leslie’s Dry Acid.
How much chlorine do I add to my pool for the first time?
If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.
How long does it take for pool to clear after shock?
When is it safe to go into a pool after it’s shocked? In general, it’s recommended that you wait up to 24 hours to hop into a pool after it’s been shocked, depending on the size of the pool, Alan says.
What’s the difference between pool shock and chlorine?
1) What is the difference between chlorine and shock? Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock.
Do you shock pool after rain?
Shock the pool After heavy rainfall, your pool’s chlorine levels will be much lower from fighting off contaminants. Shocking your pool replenishes the chlorine lost from the rain. And while one shock treatment won’t be enough to balance your water, it’ll work in the background as you continue cleaning your pool.
How long do I wait between adding pool chemicals?
Wait times for adding pool chemicals The wait times between adding pool chemicals is usually around 10 minutes each, as that is also sufficient time for the chemicals to mix in the water. Users also under normal conditions can swim roughly 10 minutes after adding chemicals.
Do you adjust pH or alkalinity first?
Check Total Alkalinity (TA) first, then adjust for proper pH range. Proper TA will buffer pH, that is, it will help to prevent pH fluctuations. Use fresh, high quality test strips. Excessively high bromine or chlorine levels can result in false pH and TA readings.
How often should pool be shocked?
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
Why is my pool green when I just filled it?
Your first instinct when you fill your pool with new water, is to shock it. But that shock then oxidizes the metals, that chemical reaction then causes the green hue in your water. This is common with refills that used well water or even water that hasn’t been shocked but instead contains a high level of metals.