# Question: How To Get Cubic Yards

You can easily calculate cubic yardage by converting all three dimensions of your material into yards and multiplying them. For example, if you dig up a flower bed that is 9 feet long, 3 feet wide and 12 inches deep, you will have one cubic yard of dirt.

## How do I calculate yards of dirt?

Cubic yards are used to measure the materials we provide, such as topsoil, sand, pit run, and gravel. We’ll need to know how many cubic square yards of the product you will require for your project. This is the basic formula: length [ft] x width [ft] x depth [ft] = cubic sq.

## How many cubic yards is a 10×10?

Once you come up with the number you will then divide it by 27, Which is the number of cubic feet in a cubic yard. The amount you will need for a 10 x 10 slab is 1.3 cubic yards, we always add an extra 10% to allow for any slab depth variations or spills that may occur.

## Is a cubic yard 3x3x3?

it does not have to be any specific size, just so the cube equals 2.47 cubic yards. Now fill it with cubes that are each 1 foot on each side as in the diagram. Since 1 yard is 3 feet you can see that it takes 3x3x3 = 27 one foot cubes to fill the box. Thus there are 27 cubic feet in one cubic yard.

## How do you figure yards of gravel?

Multiply the length, width, and height together to find the volume of the space. Now, convert the volume to cubic yards. If the initial measurements were in inches, then convert cubic inches to cubic yards by dividing by 46,656. If the initial measurements were in feet, then divide by 27 to get cubic yards.

## How do you calculate soil volume?

To estimate soil volume for any area, all you need is a tape measure. “The basic formula is simple: Length x Width x Height = Volume,” says Michael Dean, co-founder of Pool Research. Then divide the number of cubic feet by 27. So one cubic yard = 27 cubic feet = 1,728 cubic inches.

## How many cubic are in a yard?

A yard is 3 feet or 36 inches, and therefore, a cubic yard is 3 x 3 x 3, or 27 cubic feet(ft3).

## Is 1 yard the same as 1 cubic yard?

Under the United States’ Customary System, 1 yard is equal to 3 feet or 36 inches. And a cubic yard is the volume of material that fits in a space that is 1 yard wide by 1 yard deep by 1 yard high. This is important because quite a few common materials are measured in cubic yards — here are some of them: Concrete.

## How do you convert square yards to cubic yards?

Convert the square yardage to cubic yards by using the planned depth of the slab. Multiply the area of the slab by the intended slab depth. Your result represents the cubic yards of concrete needed to cover an area the width and length measured with a slab of the proposed thickness.

## How many yards of concrete do I need for a 24×24 slab?

For example, for a concrete slab that is 24′ X 24′ X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.

## How do I figure out how many yards of mulch I need?

Keep in mind that mulch is sold by the cubic yard. One cubic yard of the material covers a 324-square-foot area an inch deep. So, to determine your total, multiply your square footage by the depth in inches desired, then divide by 324. Here’s your formula: Square footage x desired depth / 324 = cubic yards needed.

## How many square feet is 8 cubic yards?

Cubic yard to Square feet Calculator 1 cubic yard = 9 ft 2 0.037 cubic yard 8 cubic yard = 36 ft 2 0.8381 cubic yard 9 cubic yard = 38.9407 ft 2 1 cubic yard 10 cubic yard = 41.7743 ft 2 1.1712 cubic yard 11 cubic yard = 44.5148 ft 2 1.3512 cubic yard.

## How many yards of stone do I need?

Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This number is how many cubic yards of crushed stone you need.

## How much does 1 cubic yard of gravel weigh?

One cubic yard of gravel can weigh between 2,400 to 2,900 lbs. Or up to one and a half tons approximately. Generally, a cubic yard of gravel provides enough material to cover a 100-square-foot area with 3 inches of gravel. Keep in mind that some materials compact more than others, so exact coverage may vary.

## How do you calculate the volume of a gravel?

Measure the length and width of the area in feet and multiply the figures together. Multiply your area figure by the depth of gravel that you wish to use, ensuring your measurement is also in feet. If your depth is in inches, divide it by 12 first. You now have a cubic feet volume figure.